Lift Kits RBP-LK217-60G

$940.80 $1,600.00

Quantity

**Discounted/Clearance item, All Sales Final, No Returns or Exchanges

  • Product Description

      Fitment: Dodge 2500/RAM 2500 GAS ONLY (Excludes DRW models) 2009 - 2012, Dodge 3500/RAM 3500 (Excludes DRW models), 2009-2013
      • RBP Suspension Lift Kit System: 2009-2013 Dodge 2500/2009-2012 3500 4WD 6 inch GAS
      • RBP Lift Kits are the ultimate in off road suspension lift kits. In true RBP fashion, our lift kits will let you pull double duty and have your daily driver handle better than it did stock, and still tackle the off road terrain like a pro. This 6" lift kit for your 2009 - 2013 Dodge 2500/3500 4WD is Made in the USA and will allow you to clear up to a 37" tire. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control. In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft. RBP is also proud to offer upgrade FOX Shocks (RBP-125FS-65) are available as well. All RBP Lift Kits are backed by a Limited Lifetime Warranty - so you're covered, no matter what. With this amazing RBP Lift Kit package, you can tackle the streets of the city, or the trails in comfort, style and performance.
      • Important Notes: Works on 2013 2500 with 4 link front suspension only. Will not fit 1 Ton Trucks. 2-piece rear driveshaft requires carrier bearing drop kit Will not fit dually applications Rear axle diameter will be 3.5 inch or 4 inch, measure before ordering Minor trimming may be required with some tire/wheel combinations. A front bumper spacer kit (RBP-217BPS) is available to gain clearance if necessary If driveline vibration is present, some 6 inch kits may require the carrier bearing drop kit. See installation instructions (step 17) for fitment details. Will work with Power Wagon models with the addition of sway bar link kit. Power Wagon models came factory with a 2 inch taller ride height so net lift gain will be 4 inch over stock. Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring